未來，環保型家用排油煙凈化器的設計思路應該從風量、風壓、噪聲、本體阻力和油煙凈化效率等5個參數考慮，使之達到佳的搭配。

In the future, the design idea of environmental protection type household lampblack purifier should be considered from 5 parameters, such as air volume, air pressure, noise, bulk resistance and oil fume purification efficiency.

1、在外觀上可采用三面封閉的斜面集風設計，低位安裝，使油煙機的油煙捕集效率增高，這樣也可以采用較小功率的風機。

1, can be used in the appearance of the surface of the three side of the wind collection design, low installation, so that the efficiency of oil fume hood increased, so you can also use a smaller power fan.

2、三面封閉的集氣設計，可以防止油煙散逸，提升操作面的控制風速，使油煙順利而完全地進入油煙機，減少危害；斜面結構設計結合空氣動力學原理，使油煙氣流產生后快速形成旋流，從吸風口進入油煙分離段分離油氣，避免油污進入風機內，使機器內部保持清潔，免除整機拆洗的煩惱。

2, three closed gas gathering design, can prevent the oil smoke dissipated, the operation control of wind speed increases, the oil fume smoothly and fully into the lampblack machine, reduce hazards; slope structure design combined with the principle of aerodynamics, the rapid formation of the oil fume swirl flow generated from the suction inlet, into the smoke separation section of the separation of oil and gas, to avoid the oil into the fan, inside the machine to keep clean, remove the trouble and.

3、根據家庭廚房油煙的物理性質，將油煙分離和抽吸煙氣設計為兩個獨立的系統，前段將油煙中的炭黑顆粒物和霧狀油粒子分離出來（如可采用前置離心盤的方法），后段利用抽吸功能將煙氣排入室外。

3, according to the physical properties of the family kitchen, the oil fume separation and flue gas suction design for two independent systems, some smoke in carbon black particles and oil mist particles (such as separation method can be used to pre centrifugal disc), using the suction function after the flue gas discharged into the outdoor section.

4、在外表面設計上可采用納米涂層不沾油材料，以減少油煙機自身被侵蝕和污染。

4, the outer surface of the design can be used nano coating non stick oil material, in order to reduce the lampblack machine itself by erosion and pollution.